{"id":48960,"date":"2019-11-21T06:00:28","date_gmt":"2019-11-21T11:00:28","guid":{"rendered":"https:\/\/engineswapdepot.com\/?p=48960"},"modified":"2019-11-21T02:15:44","modified_gmt":"2019-11-21T07:15:44","slug":"bmw-e30-with-a-twin-turbo-v10","status":"publish","type":"post","link":"https:\/\/engineswapdepot.com\/?p=48960","title":{"rendered":"BMW E30 with a Twin-Turbo V10"},"content":{"rendered":"

\"BMW<\/a><\/p>\n

Odd Gunnar Kj\u00f8niksen<\/a> has spent five years transforming his BMW E30 in his garage in Tr\u00f8gstad, Norway. The car was built from the ground up in order to make the ultimate drift monster. <\/p>\n

\"BMW<\/a><\/p>\n

\"BMW<\/a><\/p>\n

\"BMW<\/a><\/p>\n

The project starts with a 1988 BMW E30 318i stripped down to a bare shell. Odd Gunnar reinforced the chassis with an intricate roll cage and tubular front and rear frame. The firewall and transmission tunnel were enlarged to make room for the large powertrain. <\/p>\n

\"BMW<\/a><\/p>\n

\"BMW<\/a><\/p>\n

In the engine bay sits a twin-turbo S85B50 V10 built by Vidar Strand at VS Motor<\/a>. The engine is built with upgraded pistons, rods, camshafts, valves and runs on a MoTeC M150 ECU. Odd Gunnar built a custom intake manifolds and intercooler to support the twin Precision 6062 Gen2 turbochargers.<\/p>\n

\"BMW<\/a><\/p>\n

\"BMW<\/a><\/p>\n

The V10 is kept lubricated thanks to a dry sump system using a custom billet pan and four-stage oil pump. The engine made 1276 horsepower and 1375 Nm (1014 lb-ft) of torque on 1.5 bar (21.7 psi) of boost on Sunoco E85R fuel. <\/p>\n

\"BMW<\/a><\/p>\n

\"BMW<\/a><\/p>\n