Enjuku Racing now offers a LS1 swap kit for the Hyundai Genesis coupe for $2,699.99. The kit includes engine and transmission mounts, oil pan, dipstick, oil filter relocation, one-piece driveshaft, shifter extension and Hurst short shifter.
Enjuku Racing now offers a LS1 swap kit for the Hyundai Genesis coupe for $2,699.99. The kit includes engine and transmission mounts, oil pan, dipstick, oil filter relocation, one-piece driveshaft, shifter extension and Hurst short shifter.
I have a 2010 genesis track edition/gt coupe and i see what The ls1 kit comes with but i need more information on whats needed to complete the transmission and rear differential or if i can use the factory diff. Car is triptronic/paddle shifted also
I contacted Enjuku and this is what they said
I hope that answers your question. If it doesn’t please let me know.
I have a 2013 genesis coupe manual and i wanted to know if this kit will fit my car thank you
It sounds like it will with some modifications.
Hey I have a 2016 3.8L r spec genesis. I was wondering if you could fit maybe LSX or LS6. How much? Is it possible?
I recommend contacting Enjuku Racing to see if there would be any issues using it on a 2016 model.
Really liking this set up but was wondering if this would fit my 2012 2.0t premium that’s an auto-manual and what specs this kit is putting out.
It should. The kit is made for 2009-2012 models. 2013+ models will work as well but might require extra modifications.
That’s good. What is the whp and the torque this set up is putting out?
I don’t think I understand your question. Are you asking how much power the red Genesis in the photos is producing?
Nono how much does this LS1 setup put out. Like Wheel horse power and torque wise
The LS1 outputs 305-350 horsepower and 350-365 lb-ft of torque depending on what year and if it was out of a Corvette or F-body.
Could this set up handle an LS3 with the t56 transmission?
In theory yes it should work. But I would double check with them just to make sure. They are very good at answering questions via phone and email.
I have 2010 3.8 .. i understand this kit fits 2.0t what modification will i need to fit it on mine ?
It will work with the 3.8 L V6 model but you will need to contact them directly to see what modifications it will require.
I’m gonna go out in left field and the twilight zone double parked and ask if this kit(LS-1)
would fit into a 2010 Hyundai Elektra..I’m well aware of the modification factor here..Just curious…
Sorry that is supposed to read “ELANTRA” and not Elektra..Thanks in advance people!
I don’t think this kit would give you any advantage over any general LSx swap when used in this application. Because of the amount of work required to convert the Elantra from transverse layout/FWD to longitudinal layout/RWD I think any kit would work. Better to get some nice cheap mounts and crossmember and then adapt the engine bay and transmission tunnel to them.
Well this swap work with LS3 motor?
It should work. The only issue I could think of would be oil pickup tube with the Canton oil pan. I contacted Enjuku about it and will update this when they respond.
Update – They include a GTO oil pickup in the kit so it should work fine with a LS3. They recommend purchasing this https://www.enjukuracing.com/products/canton-racing-ls-front-sump-windage-tray.html if you want a windage tray and CTSV front accessory belt drive to bring the front accessories lower and close to the engine.
Hi…
I have a 2010 genesis coupe auto and i want LS swap kit withe 4l60 transmission and harness plug&play
thank you
Did you get an Answer? I have a 2000 SS donor car ready to go but has a auto
I have a 2010 2.0 auto gen coupe. I will be using this car for HPDE. Can you put a La motor in it. Approx what would cost be with and without install thx Scott