Mazda RX-7 with a Triple-Turbo 20B

Mazda RX-7 FD with a triple-turbo 20B triple-rotor

Angel Motorsports in Chesapeake, Virginia is building this Mazda RX-7 FD for a lucky customer. In the engine bay sits a peripheral ported 20B three-rotor with three BorgWarner SXE turbochargers. The company will use an Adaptronic M6000 ECU to control the engine. Power will transfer to the ground through a set of Hoosier 345 wide … Read more

Mazda RX-7 with a Turbo 20B Triple-Rotor

1993 Mazda RX-7 with a Turbo 20B Triple-Rotor

Wouter Bouman has been racing his 1993 Mazda RX-7 since 1996. The RX-7 is powered by a turbocharged 20B triple-rotor that makes 916 horsepower and 672 lb-ft of torque to the wheels on 24 psi of boost from a single turbocharger. Behind the engine sits a Tilton triple-disc clutch, Jerico five-speed dog box, carbon fiber … Read more

1985 Mazda RX-7 with a Twin-Turbo 1UZ V8

Mazda RX-7 with a Twin-Turbo 1UZ V8

The previous owner of this 1985 Mazda RX-7 wanted more power than the turbocharged 12A rotary could dependably support. So out went the rotary and in went a 4.0 L 1UZ V8 with two turbochargers. The engine made 439 horsepower and 520 lb-ft of torque to the wheels on 93 octane fuel controlled by an … Read more

For Sale: Mazda RX-7 with a Supercharged 3UZ V8

Mazda RX-7 with a supercharged 3UZ V8

This Mazda RX-7 is for sale in Tauranga, New Zealand with an asking price of $16,000. Popping out of the hood is a M122 supercharger connected to a 4.3 L 3UZ-FE V8. The combo produced 404 horsepower to the wheels on 5.5 psi of boost. The drivetrain consists of a A341 automatic transmission converted to … Read more

Mazda RX-7 with a RB25DET Inline-Six

Mazda RX-7 with a RB25DET Inline-Six

Jared Perry from Hakone Motorsports stopped by The Hoonigans to show off his Mazda RX-7. Under the hood sits a 2.5 L RB25DET inline-six with a stock bottom-end. It produces 415 hp and 390 lb-ft of torque to the rear wheels on 14 psi of boost from a Comp 6262 turbocharger. The engine runs a … Read more

Mazda RX-8 with a 20B Rotary

Mazda RX-8 with a 20B 3-rotor

Marcus van Klink built his Mazda RX-8 in 2016 to compete in RallySprint and Hillclimb racing. The RX-8 is powered by a peripheral ported 20B 3-rotor made from S5 RX-7 NA rotors, Mazda Factory Race bearings, PP housings and makes 370 horsepower. Behind the engine sits a Quaife 69G six-speed sequential gearbox. Enjoy the sound … Read more